Best Setting Orca Slicer
Are you looking to get the best possible print quality from your 3D printer using OrcaSlicer? You’ve come to the right place! After testing different settings, I’ve found the best setting Orca Slicer for my 3D printer that delivers smooth, precise, and strong prints. Whether you’re just starting or looking to fine-tune your prints, this guide will walk you through the settings I’ve used to get reliable results every time.
The right settings can make a huge difference in your print quality. Adjusting things like layer height, print speed, and nozzle temperature are key to getting the perfect balance between detail and strength. I’ve tailored these settings based on my own printing experience, and I think they’ll work great for a wide range of 3D printers and materials. Below, I’ve outlined the key parameters I use in OrcaSlicer, so feel free to experiment and adapt them to your specific setup!
eSUN PETG Filament
| FILAMENT SETTINGS | Filament | Vendor | eSUN |
| Recommended nozzle temperature | Min 205 °C Max 220 °C | ||
| Print Temperature | First layer 215 °C Other layer 210 °C | ||
| Bed Temperature | First layer 90 °C Other layer 85 °C | ||
| QUALITY | Layer Height | Layer Height | 0.3 mm |
| First layer height | 0.2 mm | ||
| Line Widht | Default | 0.5 mm | |
| First Layer | 0.42 mm | ||
| Outer Wall | 0.6 mm | ||
| Inner Wall | 0.5 mm | ||
| Top Surface | 0.45 mm | ||
| Sparse infill | 0.5 mm | ||
| Internal solid infill | 0.5 mm | ||
| Support | 0.38 mm | ||
| Seam | Seam Position | Back | |
| Staggered Inner Seams | Yes | ||
| Seam gap | 10% | ||
| Scarf joint seam (beta) | None | ||
| Role base wipe speed | Yes | ||
| Precision | Slice gap closing radius | 0.049 mm | |
| STRENGTH | Walls | Wall loops | 3 |
| SPEED | First Layer Speed | First Layer | 20 mm/s |
| First layer Infill | 60 mm/s | ||
| Other layers Speed | Outer wall | 35 mm/s | |
| Inner wall | 60 mm/s | ||
| Small perimeter | 30 mm/s | ||
| SUPPORT | Support | Enable support | Yes |
| Type | Tree (Auto) | ||
| Style | Default | ||
| Threshold angle | 30 | ||
| First layer density | 90 % | ||
| First layer expansion | 3 mm | ||
| On build plate only | Yes | ||
| Remove small overhangs | Yes | ||
| Advanced | Top Z distance | 0.2 mm | |
| Bottom Z distance | 0.2 mm | ||
| Top interface layers | 2 layers | ||
| Top interface spacing | 0.2 mm | ||
| Bottom interface spacing | 0.5 mm |
These Best Setting Orca Slicer have worked wonders for my prints, giving me smoother finishes and more consistent results. Of course, every printer is different, so don’t hesitate to tweak these settings to fit your specific machine or material. If you’ve got other tips or tweaks for OrcaSlicer settings that work well for you, I’d love to hear about them in the comments! Hopefully, this guide helps you level up your 3D printing. Happy printing!